• time;2024-11-19 10:56:10

Recently, the 2024 China International Internal Combustion Engine and Power Equipment Expo was held in Beijing. The key word that cannot be avoided in this exhibition is "transformation", which can be seen from the significant increase in the number of hybrid and power battery products exhibited.

Of course, transformation is not limited to the electrification of power systems, but also involves the upgrading of traditional internal combustion engine technology. The development of internal combustion engines towards higher efficiency, reliability, energy efficiency, and intelligence has become a consensus in the industry. At this exhibition, four internal combustion engine products brought by Foton Cummins are in line with this trend.

Fukang A15N

In the past two years, the market share of natural gas heavy-duty trucks has grown rapidly. From the trends of major commercial vehicle companies, high-power gas heavy-duty trucks have emerged one after another, and this segmented market has become a battleground for all.

A15N is the flagship of Fukang's high horsepower gas engine. Its maximum power can reach 580 horsepower and maximum torque can reach 2600 Newton meters. The triple advantages of high displacement, high horsepower, and high torque enable the Fukang A15N to be applied to a wider range of segmented scenarios, such as in high-altitude, mountainous areas, and transportation markets with high time requirements. In the past, it was believed that only fuel powered routes could run, but now models equipped with the Fukang A15N can also handle them.

Fukang A15N

Reliability has always been a characteristic of Fukang, and A15N also inherits this reliability gene, further upgrading its reliability. In terms of economy, the Fukang A15N uses a high-precision and high reliability gas injection system to achieve more accurate gas supply and more complete combustion. In addition, technological upgrades such as higher thermal efficiency, higher vortex end efficiency, and stronger exhaust gas bypass capability collectively contribute to a reduction in gas consumption. The gas consumption of Fukang A15N is about 5% lower than that of products of the same level in China VI, and it can save fuel costs of more than 20000 yuan per year.

In addition, the Fukang A15N is equipped with the Smart Brain 2.0 intelligent control system, which enables digital innovation capabilities such as intelligent diagnosis and remote calibration. Higher levels of intelligence bring higher reliability and lower TCO, achieving increased user operational revenue, and can be regarded as a model of creating value through technology.

Fukang F2.5

Speaking of Fukang's F platform, it can be regarded as an industry legend. Since its inception, it has created countless records of millions of kilometers without major repairs, and the highest operating mileage for users has exceeded 2 million kilometers. Its reliability has been tested for a long time.

The Fukang F2.5 inherits the classic and upgrades it again, with a maximum horsepower of 163 and a maximum torque of 460 Newton meters. When the engine speed is 1000 revolutions per minute, it can output 330 Newton meters of torque, with typical low-speed high torque characteristics, which can enable the whole vehicle to have better power performance when pulling heavy goods and in complex road conditions. Meanwhile, the customized and scenario based development mode of Fukang F2.5 further ensures that the engine can adapt to the challenges of various working conditions.

Fukang F2.5

In addition, by optimizing the combustion of the entire machine and optimizing the engine intake system and external accessories, the fuel utilization rate of the Fukang F2.5 has been significantly improved. Every bit of fuel added is fully utilized, resulting in less loss and, of course, more fuel efficiency. In addition, Fukang F2.5 has customized development and calibration for different usage scenarios of light trucks, optimized the matching of combustion and thermal management, and made product tuning and working conditions more suitable, further reducing fuel consumption.

The Fukang F2.5 also applies the Smart Brain 2.0 system, integrating electronic control management of the engine and post-processing, combined with big data from the Internet of Vehicles, greatly improving the overall vehicle attendance rate. At the same time, it can also achieve remote calibration and intelligent active diagnosis, preventing engine failures in advance. Even if there is a malfunction, the cause can be identified faster. In addition, the engine also achieves seamless regeneration, with a cleaning range of 300000 to 500000 kilometers.

On the F2.5 product, Fukang continues its consistent high quality, efficiency, fuel efficiency, comfort, reliability, and has taken the level of intelligence to a new level, becoming a widely recognized high-end blue brand power in the current market.

In addition, Fukang also showcased two non road products at the exhibition site. In recent years, Laifu Kang has been developing products for more diversified scenarios and has made significant breakthroughs in non road markets. The exhibited Fukang F2.8 and Fukang X12, as non road four stage fuel consumption products, have significantly improved power and torque compared to their predecessors, and have stronger adaptability to harsh working conditions. At the same time, customized development for application scenarios also brings users a better user experience. The Fukang X12 has a power range of 250~373kW and a maximum torque of 2300 Nm, and is widely used in excavators, drilling rigs, loaders, cranes, port machinery, and other applications. The power coverage of Fukang F2.8 is 36-54kW, with a maximum torque of 270 Nm, mainly matched with forklifts, aerial work vehicles, excavators, airport tractors, etc.

Fukang X12

Fukang F2.8

The four models exhibited this time are Fukang's flagship products in the main segmented markets. In terms of the performance of the four engines, Fukang not only conforms to the development trend of internal combustion engines, but also better meets the demand of users in the low period of the freight market for refined operation. From this perspective, Fukang is not only a technology leader, but also a value creator.